Your page says A320 requires bolts or cap screws to have heavy hex heads. I have the 2003 edition of A320 and can’t find that requirement. Where is that requirement stated?
The ASTM A320 specification does not specifically address the physical dimensions of headed bolts. However, it does refer you to ASTM A962 for some of the physical characteristics of fasteners manufactured to the A320 specification. These specifications read as follows:
ASTM A320
4.1 Bolting supplied to this specification shall conform to the requirements of Specification A962/A962M. These requirements include test methods, finish, thread dimensions, macroetch (carbon and alloy steels only) marking, certification, optional supplementary requirements, and others. Failure to comply with the requirements of Specification A962/A962M constitutes nonconformance with this specification.
Where “others” would refer to head dimensions.
ASTM A962/A96aM – 03
12.3.1 Hex Bolts – Unless otherwise specified in the purchase order heads shall be in accordance with the dimensions of ANSI B18.2.1 or B18.2.3.6M and the Heavy Hex screw series, should be used, except the maximum body diameter and radius of fillets may be the same as for the heavy hex bolts series.
Hi,
Does this mean that for A320 bolt – the default or without specifying “heavy” in the purchase order the hex. head to be supplied is “always” heavy? or the other way around?
Thanks
@Israel- The bolts would be supplied as heavy hex unless otherwise specified.